ProTrusTech
Taiwan
Raman & Photoluminescence Spectroscopy
Research-grade Raman platforms built around multi-laser excitation and automated polarization, developed and manufactured in Taiwan.
Custom Multi-Laser Raman / PL Platform
A configurable research platform that brings several excitation wavelengths onto the same sample spot, combining Raman, photoluminescence and lifetime measurement in one chamber.
- Up to six laser wavelengths on the same spot without realignment
- Spectral resolution to 0.3 cm⁻¹ (750 mm focal length, 3600 gr/mm grating)
- Low Raman shift access down to 10 cm⁻¹ with customized Bragg filters
- Sample environment from −196 °C to 1500 °C, vacuum and four-point probe
Specifications and details →
Dual-Laser Micro-Raman with 360° Polarization
A micro-Raman system with two built-in lasers switched entirely in software, designed for angle-resolved polarized imaging of anisotropic materials.
- Two integrated lasers, software-switched with no manual alignment
- Automated 360° angle-resolved polarized imaging per laser
- Laser power set in 1 mW steps, calibrated to under 1% error
- Motorized stage 75 × 50 mm or 100 × 100 mm
Specifications and details →
Hakuto
Japan
Nanofabrication & Process Equipment
Process and analysis equipment for work that conventional tools cannot handle cleanly: ion beam etching for hard-to-etch materials, and online mass spectrometry for watching a process while it runs.
Hakuto (NS) — 10IBE / 20IBE-C / 20IBE-J
Kaufman-source ion beam milling for magnetic materials, gold, platinum, alloys and compound semiconductors. The 10IBE serves research, the 20IBE series production.
- Kaufman-type ion sources from 8 cm to 20 cm
- Argon only: no toxic process gases required
- Planetary stage motion for etching uniformity
- Substrates from 3 to 6 inch, 1 to 12 per run depending on model
Specifications and details →
Online Quadrupole Mass Spectrometer
An online quadrupole mass spectrometer for real-time gas analysis, built to sit on a process tool rather than in an analytical laboratory.
- Quadrupole analyser with electron impact ionization
- Mass range options of 1–100, 1–200 or 1–300 amu
- Up to 1000 readings per second per amu
- Faraday and secondary electron multiplier detectors
Specifications and details →
Idasonic
United Kingdom
Ultrasonic Spray Coating
Ultrasonic atomization systems for uniform thin-film deposition, from desktop laboratory work through to pilot-scale production.
Automated Ultrasonic Spray Coating
A high-precision nanocoating system with full three-axis motion control, built for demanding R&D and pilot-scale deposition workflows.
- Automated XY travel 400 × 400 mm, Z axis 0 to 200 mm
- Three-channel syringe pump, syringes up to 60 ml
- Flow rate 0.01 to 40 ml/min depending on syringe
- Substrate heating to 200 °C, optional 500 °C upgrade
Specifications and details →
Desktop Ultrasonic Spray Coating
A desktop system producing homogeneous nano-scale thin films, positioned as the cost-effective route into ultrasonic coating for laboratories.
- XY motion 300 × 300 mm with manual Z height adjustment
- Flow rate from 17.9 nl/min to 84 ml/min depending on syringe
- IdaCalor heating plate to 500 °C, 250 × 250 mm
- IdaMist® ultrasonic atomizer operating at 100 kHz
Specifications and details →
Product names, model designations and trademarks are the property of their respective manufacturers. Specifications are reproduced from the manufacturers’ own published material and may change without notice; please confirm current details with us before ordering.
For manufacturers
Want your line represented like this?
We take on a small number of instrument lines so each one gets real attention. Tell us what you make and where you want to grow.
Talk to us →
